Citric Acid Powder 500g

We recommend using pure anhydrous citric acid for cleaning your ionizer. This form of citric acid is the safest and most effective available. Chanson’s citric acid is food-grade and of the highest quality, leaving no harmful residues behind.

TO CLEAN PJ6000: 

1. Turn Off the Ionizer:

   • Power off your ionizer and disconnect it from the water supply.

2. Insert the Cleaning Cartridge:

   • Open the filter compartment on your PJ6000.

   • Remove the standard filter and replace it with the Chanson Cleaning Cartridge filled with citric acid.

3. Reconnect and Run Water:

   • Reconnect the ionizer to your water supply.

   • Slowly turn the water on.

   • Set the ionizer to "Purified Water" mode (not alkaline or acidic settings).

   • Let the water run through the unit for about 30 seconds to allow the citric acid solution to fill the system.

4. Soak the Unit:

   • Turn off the water.

   • Allow the cleaning solution to sit inside the ionizer for 2 to 12 hours (overnight is ideal) to dissolve mineral buildup.

5. Flush the System:

   • After soaking, turn the water back on.

   • Run clean, purified water through the ionizer for 5–10 minutes to flush out any remaining citric acid.

6. Replace with Your Regular Filter:

   • Remove the cleaning cartridge.

   • Reinstall your standard water filter.

7. Final Rinse:

   • Run the ionizer again for a few minutes to ensure the filter is properly primed and the system is clean.

Important Tips:

• Always use food-grade anhydrous citric acid, like Chanson’s official cleaning solution, to avoid damaging the unit.

• Clean your PJ6000 every 3 to 6 months, depending on your water hardness and usage.

Citric Acid has several uses: it breaks down mineral deposits in kettles, coffee machines, and dishwashers; cuts through soap scum, hard water stains, and rust; and improves the effectiveness of some natural disinfectants. It's super versatile because it's natural, safe, and biodegradable.